For trouble-free and safe operation, this device must be installed and regularly maintained by a specialist trained by us. Arrange regular maintenance appointments with your installer to ensure trouble-free operation over the long term with the latest safety updates and new functions.
Use the flush mount key-switch to arm and disarm your alarm system. Simply turn the key instead of entering a PIN code. Operating your system is faster and easier. Apart from the arm/disarm function of the alarm system (or individual partitions), you can use the flush mount key-switch to control electronic equipment (entrance lighting, garage door, etc.). Two switch contacts are provided. You can set these as a permanent contact or as a pulse generator. The two colored LEDs inform you permanently about the state of connected devices. For example, you can see if the system is currently armed or disarmed. The reinforced fascia plate, the high-quality ABUS cylinder and a robust weatherproof housing (IP 55) protect the key-switch against external influences. The flush mount key-switch is designed for half-cylinders (10/30). It is available for both surface and flush fitting. The surface-fitted variant is protected from tampering by a cover contact and an anti-removal wall contact.
| Art. no.: | SE1100 |
| Dimensions: | (WxHxD) 106x134x42 mm |
| Width: | 106 mm |
| Housing material: | ABS |
| Height: | 134 mm |
| Compatible with: | Secoris, Secvest, Terxon |
| Length: | 42 mm |
| Power consumption: | 0,02 W |
| Installation location: | Flush fitting |
| Net weight: | 0,45 kg |
| Sabotage monitoring: | |
| IP protection class: | 55 |
| DC voltage supply: | 10-15 V |
| Status display: | Yes (2 LEDs) |
| Power consumption: | 2 mA |
Belgique
België
Brasil
Canada (EN)
Canada (FR)
Deutschland
España
France
International
Italia
Magyarország
México
Nederlands
Österreich
Polska
Portugal
România
Schweiz
Suisse
Sverige
Svizzera
USA
United Kingdom
tiếng Việt
Україна
